5 Types of Steel Stairs and How They’re Fabricated

Many homes and properties have steel stairs. We normally consider them as backdrops. Thus, we never knew the processes involved in creating high-quality steel staircases.

In this short post, you’ll learn everything about various types of steel stairs and their fabrication process from start to finish.

Metal Spiral

Spiral staircases involve complex fabrication processes. Bending processes require full attention to every curve and bend to prevent unnatural shapes.

Most properties that use spiral staircases have limited space to add a straight, L, and other staircase shapes.

Straight

These traditional staircases require the least fabrication work because they’re straightforward. Straight staircases have no special aesthetics. However, their functionality makes them a crucial part of any two-storey property or higher structures.

L-Shaped

These are often the staircase designs situated in corners. They’re the best substitutes if there’s no space for a straight staircase’s length.

Landings remove the risk of continuous fall because it cuts off its height effectively. Plus, L-shaped staircases are greatly stable because of their natural structure.

Curved

These do not have the same complexity as metal spiral staircases. However, the processes involved are alike. Thus, fabricators have a faster turnaround time for curved staircases than spiral ones. Plus, its installation is faster because of its stable, multi-point foundation.

U-Shaped

These staircases don’t pronounce their U-shape massively. They look like double straight staircases due to their attachment.

U-shaped stairs are easy to install because they’re naturally stable and secure. You can expect a fast installation time with U-shaped stairs.

Work With The Best Fabricators For The Best Staircases

You can always count on us at Scarboro Steel Works for high-quality staircases. Our decades of knowledge and experience guarantee you’ll always get the best results for your project’s needs. Contact us today to learn more about our services and portfolio.

The Need For A Family Dentist: Know The Reasons Why

Dentists often recommend having their kids visit a dental clinic half a year after their first tooth appears. Though this may appear to be so early, cavities and tooth decay in toddlers and young kids can be very painful and paves the way for poorer oral health in later childhood. This is why a family dentist in Toronto becomes very important when it comes to taking good care of everyone’s oral health of your family. Most often, dental professionals offer strategies to get rid of any undesirable oral habits that can also help you as parents to train your children to have good oral practice.

Good oral health habits best start as early as possible and a family dentist in Toronto will not only make your whole mouth and teeth healthy but can also make sure that all your loved ones are fully considered as well. On the first visit to the dentist with your little one, what you may expect is a demonstration of how to protect your kid’s teeth and prevent them from getting damaged. You will also be provided with professional advice on what to do at home. This often includes what to do or how to handle feeling bottles or sippy cups.

Apart from those amazing perks, getting your own family dentist in Toronto also means having flexibility in your time or daily schedule. This is very important, especially if you are a busy working employee. So, rather than facing some kind of resistance, you will enjoy time flexibility for the oral care that your entire family deserves. Not to mention that you may also set several visits to the clinic for a more customized and tailored fit dental care for each one of your family members, regardless of their age. Depending on your specific concern, you can make an appointment just for yourself or book a schedule for your little kid or for your mom or dad. Hence, everyone gets the dental care they need.

Top 4 Reasons Why Modern Kitchen Rocks

If you are contemplating which kitchen style works best for you, whether it is a traditional or modern kitchen, then you have come to the right place. We are going to tell you why the latter is very popular today. We have identified only four reasons why among many other benefits it provides homeowners.

Functionality

Compared with traditional kitchens of the past, today’s kitchens are becoming more functional. From the specific design elements to huge home appliances, a modern kitchen makes the daily tasks a lot easier. Plus, it offers creative storage solutions in your cabinetry because the designs promote efficient use of available space without eating up the functional areas.

Efficiency

The advanced technologies and features of a modern kitchen are designed to promote efficiency in your home. From huge appliances to small items like faucets are made to conserve energy and prevent wastage. This reduces your energy bills while making other kitchen chores more efficient and easier. Moreover, most of the materials for modern kitchens such as cabinets, countertops, and flooring don’t use as much resources like traditional style kitchens. In fact, many of the modern materials are made from recycled items.

Technology

Needless to say, technology is the most defining element of a modern kitchen. For instance, you can install digital dashboards into your kitchen cabinets or countertops to track things in your kitchen. The best way to incorporate technology in your kitchen is to opt for smart appliances with built in readers on them. For sure, your guests will be jealous of it and would want to do the same.

Customization

The best part of having a modern design in your kitchen is the customization it offers. It will allow you to create a space that satisfies all the needs of your family members wherever they are in the kitchen. So, if you are ready to discuss your dream kitchen, talk to us and we will be happy to customize it and build your dream kitchen within your budget, of course.

What Is A Construction Trailer And How Can You Benefit From Using It

Regardless of what type of construction project you are going to start building, chances are you will need a construction trailer for it. Commencing your construction project without a temporary space on-site is a big mistake. Why is this so? Know the reason why by learning what construction site trailer is all about and how you can benefit from using it.

Also known as a mobile office trailer, a construction trailer is a portable, temporary space widely used by construction project managers. Contractors and workers alike spend most of their day in the site when the project is ongoing. This means they all need space to manage the project, meet with the workers, or simply take a break from work. So, if your construction project is expected to last for months, it is wise to have a mobile office space on your site. You will also enjoy the following benefits.

Security and safety: knowing that all your equipment and tools are secured is a big deal. Construction trailers are built using weather-proof and high-quality materials with advanced locking mechanisms. So you don’t have to worry about theft and weather damage. What’s more is knowing that your workers remain safe while doing their job and a construction trailer is a perfect avenue where your crew can take care of themselves or tend to any small injuries from doing their work.

Customizable and flexible: it is also good to know that a construction trailer is highly customizable. This means it can be equipped with the things that you and your crew need. A couple of customization features are the provision for water, electricity, air conditioning, awning, and more.

Affordable: and of course, since this temporary office space is readily-made and portable, it costs much less than having to build your own site office from zero. In fact, renting them on a monthly basis would be much cheaper. The cost depends on the trailer size, customizations you need, and the length of the contract.

So, having a highly flexible, customizable, highly secure and safe, made from quality materials, and weatherproof construction trailer is definitely worth each penny you pay for renting it.

5 Proven Steps to Maximize Raw Material Laser Cutting

Laser cutting technologies have elevated the fabrication industry’s capability to produce outstanding results for clients with precision products. A laser cutting fabricator’s long-term technological experience establishes their best practices for this task. Here are five proven steps to maximize raw material laser cutting.

The Best Materials Available

All laser cutters can cut through plastic, wood, and steel of varying densities.

A dependable laser cutting engineer in Toronto will input the right laser intensity to ensure a clean cut with zero artefacts. Therefore, clients who finalize their material choices early guarantees accurate component cutting in their projects.

Properly-Spaced Laser Cutting Paths

All minimum cutting spacing must be equal to the material’s thickness to ensure accurate and error-free cuts. Engineers take their time to space the material and cutting zones correctly. However, experienced engineers can perform cutting path setups faster than inexperienced cutters.

Simpler Symbols and Letters Are Always Better

Laser cutters can produce outstanding complex engravings and cutting maneuvers by using its computer-guided system. However, experienced fabricators understand that having simpler symbols and letters is always better for long-running projects. These parameters guarantee that they get the clearest results for their project’s requirements.

Minimum and Maximum Sizes

Engineers brief their clients about the laser cutter’s maximum size limit to ensure clients will provide workpieces within the measurements. On the other hand, engineers provide the minimum cutting size possible to guide the client’s product designers about the technology’s cutting limits.

Locking Nodes

Long-term experienced laser cutters can perform a variety of locking node cuts. Plus, designers can consult with laser cutting engineers on the best node-cutting implementations for their respective designs.

Have The Best Laser Cutters To The Task!

You can always count on us at Metal Tronics for the most accurate laser cutting processes for your projects. Contact us today to learn more about everything that we can do for you today!

The Advantage of Using A Claw Pump

Though a rotary tooth compressor and a claw pump do different processes, their working principles are quite the same. Because claw vacuum pumps do not require liquids to lubricate and seal the device, they are very capable of handling challenging operating conditions and are very durable. Same as how a rotary tooth pump works, a claw pump consists of two counter-rotating elements to produce the expansion and compression needed. These rotors have very minimal clearance between each claw and are mounted very close to each other without getting contacted.

It is the claws that suck in the air through the inlet as they spin inside the pump’s housing. During each full rotation of the claws, two compression cycles are created. In every new intake of the air, the vacuum pump compresses a new pocket of air. The use of a claw pump is very ideal for applications wherein increased process compatibility and low maintenance is very important. It’s most ideal to utilize in applications where harsh working conditions are a challenge such as in the case of wastewater treatment facilities.

More importantly, the pump can be incorporated into multiple-claw systems, it can be used to meet even the most unique requirements. In addition to being robust, the application of a dry claw pump also decreases the possibility of condensation and contamination of the compressed vapour. The higher the operating temperature inherent in the application of the pump means the better its ability to process vapours with higher temperature, too. Likewise, the pump offers positive water vapour pumping qualities, making it work more efficient than a comparable rotary vane pump.

Overall, it is very important to note that the higher operating temperatures often need the purge of pump bearings and seals to prevent the failure caused by heat produced during the compression process. Ultimately, the utilization of a claw pump will help save you on energy costs.

Gender-Neutral Birthday Gifts For A Kid’s Birthday Party

Whether it is your eldest child’s birthday or your youngest toddler, giving them gender-neutral gifts is one practical way of making his or her day even more special without wasting your money. Here are the top four gift ideas that will make your kid’s birthday party even more exciting.

Gift Idea #1: Building Toys

Perhaps these are the most gender neutral toys every parent could find. Of course, the most famous building toys are the Legos. They usually come in different sets and sizes. For smaller kids, there are those that come in starter sets while for your bigger children, aged 5 and above, there are also advanced sets that can make your youngsters become more creative in building any structure they can imagine.

But aside from Legos, there are many other building toys available such as the widgets and magna tiles that are both very unique in their building capabilities and attractiveness to kids. Many of them are magnetic, making your kid’s playtime even more fun and exciting.

Gift Idea #2: Craft Supplies

This gift idea is perfect for your kid’s birthday party if your youngster loves creativity. Giving him or her a craft box full of various art supplies would be a great gift you can give. You can put any item you want or your kid loves to use often. But make sure that they are washable if you don’t want them ruining your favorite blouse or shirt. You can include scotch tape, school glue, watercolours, crayons, coloured pencils, markers, tempera paints, paint brushes, and so on.

Gift Idea #3: Books

Whether your kid is a bookworm or not, books are a timeless gift. There are countless options for a book title that you can get for your kid. Just narrow the options by considering what your little one finds enjoyable to read or to listen to every time you read them stories at night. There are also boxed sets of books which are great if you want a variety of stories or you can go for anthologies that are also very fun to read.

Gift Idea #4: Pretend Play

Play pretend gift idea is also amazing. One of its biggest perks is that your kids won’t need a lot of toys to enjoy it. A couple of toy food and toy animals would be good enough already. They would make a very fun play idea not just for your kids but for the whole family, too! Just make sure that you go for the ones that look like the real deal and are made to last. 

So, there you go! These gift ideas for your kid’s birthday party will surely make the event memorable.

Knowing Which Threadlocker To Use

Threadlockers are chemical adhesives used in threaded assemblies such as nuts and bolts. Their purpose is to securely lock the assembly in place in order to ensure that no loosening or backing out happens.

When it comes to using a threadlocker, it’s very simple and does not require complicated tools. Just a small amount or one drop of the chemical is needed to be applied to the front threads of the bolt. It will then cover the female thread once the bolt mates with the retaining piece. Given the different types of threadlockers as they come in various strengths, colours, and grades, it is important that you know which is the right one for your application.

In terms of bond and wicking properties, there are four major options for a threadlocker: low, medium, high, and wicking. Needless to say, the low variant offers low strength bonds that can be disassembled with the use of hand tools only. It is ideal for assemblies that need secure fastener holding in place but have to be disassembled from time to time. Conversely, a medium threadlocker is ideal to be used for crucial joints that may require disassembly but very rarely.

As its name suggests, high strength threadlocker is perfect for use in assemblies that require permanent bonds and it can only be disassembled using heat and power tools. This is why it must not be used on a threaded assembly that has to be taken apart. Otherwise, the components will be damaged. Lastly, the wicking variant of threadlockers are used for retrofitting thread lockers into existing assemblies as well as in addressing special challenges of the manufacturing process.

Regardless of the strength variant of threadlocker you need, they are proven effective in sealing leaks and resisting loosening of threaded fasteners caused by impacts and vibration. They naturally prevent corrosion by keeping fluids out of the thread and providing a barrier against corrosion.

Debunking Important Myths About Auctions

Auctions are an excellent way to buy and sell unique items at better prices and in a much more fun experience. However, many are still in doubt about this market event and commercial auctions, in particular, are surrounded by a couple of myths that prevent both the seller and buyer from benefiting from this one-of-a-kind market channel. Among these misconceptions that must be cleared, once and for all, here are the top two debunked myths so that you won’t miss this amazing opportunity.

Items at auctions are not in good condition

This is one of the biggest myths that must be corrected. The reality is that machines being auctioned come at reasonable prices, especially those that are well maintained or repaired to stay in their good working condition. Compared with buying brand new machinery, the cost of this equipment is much lower. Moreover, reputable auctioneers will not put their names at risk by conducting commercial auctions with junk or damaged equipment. They ensure that every piece they auction has been completely checked and inspected for any issues.

Auctions come as the last option

This misconception is actually the opposite of the truth about commercial auctions. Reported sales during this type of auction as well as other types have set high records across industrial applications. It is entirely a myth that participating in this event is just a last resort to sell used or brand new products and machinery. On the contrary, auctions set great competition that makes prices go higher after receiving several bids. The cost of a machine can increase so fast after a buyer places the first bid until it sells at a much greater value. So, it does simply make sense that an auction will make it be the last resort to sell or buy equipment or any other product.

Why It Is Important To Know The Major Band Saw Parts

If you have been contemplating as to what would be the best band saw to buy for your cutting application, knowing the basic parts that comprise a band saw will help you find the best selection. With this, we will be discussing each of the key band saw parts and their role in the overall cutting process.

The Blade: the blade is perhaps the most vital of all band saw parts. A band saw blade comes in different types and there are plenty of factors to take into account such as tooth configuration, material, gullets, and more. This is why it takes careful consideration to find out more and a separate section to discuss everything about band saw blades in detail.

The Motor: this is one of the band saw parts that you must be very particular about. Always opt for a higher motor power than what you need just in case. This will enable you to cut harder materials than you normally do. For most DIY projects and cut light timber, a motor with 2.5 to 3.5 amps could be sufficient. But if you’ll use it for industrial or heavy-duty cutting, then a higher motor power is important.

The Frame: this is the component that holds all the other band saw parts together. In general, there are two kinds of band saw frames, plastic and metal. Obviously, if your cutting application needs a bigger band saw, then a rugged steel frame is what you need since it can support more strength and weight of the other parts. The band saw made of this frame tends to be costlier but is a must for a band saw with more than 10” size.

The Table: the table is the simplest and basic part of a saw but don’t be misled by its simplicity. You still need to know about its throat value it has or the cut you see in the middle of the table. It will dictate the size that the machine can cut.